Zabbix
Public
Source
ROW |28415 |20 |1.3.6.1.4.1.232.3.2.2.2.1.2.{#SNMPINDEX} |10256 |#{#CACHE_CNTRL_INDEX}: Disk array cache controller status |system.hw.diskarray.cache.status[cpqDaAccelStatus.{#SNMPINDEX}] |1m |31d |0 |0 |3 | | | | |NULL |118 | | |0 | | | | |2 |NULL |MIB: CPQIDA-MIB&eol;Cache Module/Operations Status. This describes the status of the cache module and/or cache operations.&eol;Note that for some controller models, a cache module board that physically attaches to the controller or chipset may not be an available option.&eol;The status can be:&eol;&eol;Other (1)&eol; Indicates that the instrument agent does not recognize the status of the cache module. You may need to upgrade the instrument agent.&eol;&eol;Invalid (2)&eol; Indicates that a cache module board has not been installed in this system or is present but not configured.&eol;&eol;Enabled (3)&eol; Indicates that cache operations are currently configured and enabled for at least one logical drive.&eol;&eol;Temporarily Disabled (4)&eol; Indicates that cache operations have been temporarily disabled. View the cache module board error code object to determine why the write cache operations have been temporarily disabled.&eol;&eol;Permanently Disabled (5)&eol; Indicates that cache operations have been permanently disabled. View the cache module board error code object to determine why the write cache operations have been disabled.&eol;&eol;Cache Module Flash Memory Not Attached (6)&eol; Indicates that the flash memory component of the flash backed cache module is not attached. This status will be set when the flash memory is not attached and the Supercap is attached. This value is only used on flash backed cache modules that support removable flash memory.&eol;&eol;Cache Module Degraded Failsafe Speed (7)&eol; Indicates that the cache module board is currently degraded and operating at a failsafe speed. View variables cpqDaCacheMemoryDataWidth and cpqDaCacheMemoryTransferRate to obtain the cache module board`s current memory data width and memory transfer rate.&eol;&eol;Cache Module Critical Failure (8)&eol; Indicates that the cache module board has encountered a critical failure. The controller is currently operating in Zero Memory Raid mode.&eol;&eol;Read Cache Could Not Be Mapped (9)&eol; Indicates that the read cache memory in a split cache configuration could not be mapped by the operating system and as a result is not available. This status may be caused by virtual space limitations in certain operating systems and is only applicable to B-Series controllers.|0 |30d |0 | |NULL | | | ---- Copyright (C) 2001-2024 Zabbix SIA---- This program is free software: you can redistribute it and/or modify it under the terms of-- the GNU Affero General Public License as published by the Free Software Foundation, version 3.---- This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;-- without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.-- See the GNU Affero General Public License for more details.---- You should have received a copy of the GNU Affero General Public License along with this program.-- If not, see <https://www.gnu.org/licenses/>.--TABLE |hgsetFIELDS|hgsetid|hash |ROW |1 |e629fa6598d732768f7c726b4b621285f9c3b85303900aa912017db7617d8bdb|ROW |2 |4ec9599fc203d176a301536c2e091a19bc852759b255bd6818810a42c5fed14a|ROW |3 |4523540f1504cd17100c4835e85b7eefd49911580f8efff0599a8f283be6b9e3|ROW |4 |ef8704ac79657fbf2818c74a70a571c131283abd8914eca173cd032929702789|ROW |5 |6f4b6612125fb3a0daecd2799dfd6c9c299424fd920f9b308110a2c1fbd8f443|ROW |6 |4b227777d4dd1fc61c6f884f48641d02b4d121d3fd328cb08b5531fcacdabf8a|ROW |7 |19581e27de7ced00ff1ce50b2047e7a567c76b1cbaebabe5ef03f7c3017bb5b7|ROW |8 |6b51d431df5d7f141cbececcf79edf3dd861c3b4069f0b11661a3eefacbba918|ROW |9 |b17ef6d19c7a5b1ee83b907c595526dcb1eb06db8227d650d5dda0a9f4ce8cd9|ROW |10 |4fc82b26aecb47d2868c4efbe3581732a3e7cbcc6c2efb32062c08170a05eeb8|ROW |11 |4a44dc15364204a80fe80e9039455cc1608281820fe2b24f1e5233ade6af1dd5|ROW |12 |3fdba35f04dc8c462986c992bcf875546257113072a909c162f7e470e581e278|TABLE |hostsFIELDS|hostid|proxyid|host |status|ipmi_authtype|ipmi_privilege|ipmi_username|ipmi_password|name |flags|templateid|description |tls_connect|tls_accept|tls_issuer|tls_subject|tls_psk_identity|tls_psk|discover|custom_interfaces|uuid |name_upper |vendor_name|vendor_version|proxy_groupid|monitored_by|ROW |10001 |NULL |Linux by Zabbix agent |3 |-1 |2 | | |Linux by Zabbix agent |0 |NULL |This is an official Linux template. It requires Zabbix agent 7.2 or newer.&eol;&eol;Notes on filesystem (FS) discovery:&eol;- The ext4/3/2 filesystem reserves space for privileged usage, typically set at 5% by default.&eol;- BTRFS allocates a default of 10% of the volume for its own needs.&eol;- To mitigate potential disasters, FS usage triggers are based on the maximum available space.&eol; - Utilization formula: 'pused = 100 - 100 * (available / total - free + available)'&eol;- The FS utilization chart, derived from graph prototypes, reflects FS reserved space as the difference between used and available space from the total volume.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/387225-discussion-thread-for-official-zabbix-template-for-linux&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |f8f7908280354f2abeed07dc788c3747|LINUX BY ZABBIX AGENT |Zabbix |7.2-1 |NULL |0 |ROW |10047 |NULL |Zabbix server health |3 |-1 |2 | | |Zabbix server health |0 |NULL |This template is designed to monitor internal Zabbix metrics on the local Zabbix server.&eol;&eol;Link this template to the local Zabbix server host.&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |e2d2b4e4ac28483996cc11fe42823d57|ZABBIX SERVER HEALTH |Zabbix |7.2-0 |NULL |0 |ROW |10048 |NULL |Zabbix proxy health |3 |-1 |2 | | |Zabbix proxy health |0 |NULL |Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |dd114bf0fb2f46bc84840f1bb24e2b23|ZABBIX PROXY HEALTH |Zabbix |7.2-0 |NULL |0 |ROW |10074 |NULL |OpenBSD by Zabbix agent |3 |-1 |2 | | |OpenBSD by Zabbix agent |0 |NULL |This is an Official OpenBSD template. It requires Zabbix agent 7.2 or newer.&eol;&eol;Notes on filesystem (FS) discovery:&eol; - The ext4/3/2 FS reserves space for privileged usage, typically set at 5% by default.&eol; - BTRFS allocates a default of 10% of the volume for its own needs.&eol; - To mitigate potential disasters, FS usage triggers are based on the maximum available space.&eol; - Utilization formula: 'pused = 100 - 100 * (available / total - free + available)'&eol; - The FS utilization chart, derived from graph prototypes, reflects FS reserved space as the difference between used and available space from the total volume.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |760be6e1c2194a5bb7c0df47cc5f71ca|OPENBSD BY ZABBIX AGENT |Zabbix |7.2-1 |NULL |0 |ROW |10075 |NULL |FreeBSD by Zabbix agent |3 |-1 |2 | | |FreeBSD by Zabbix agent |0 |NULL |This is an official FreeBSD template. It requires Zabbix agent 7.2 or newer.&eol;&eol;Notes on filesystem (FS) discovery:&eol; - The ext4/3/2 FS reserves space for privileged usage, typically set at 5% by default.&eol; - BTRFS allocates a default of 10% of the volume for its own needs.&eol; - To mitigate potential disasters, FS usage triggers are based on the maximum available space.&eol; - Utilization formula: 'pused = 100 - 100 * (available / total - free + available)'&eol; - The FS utilization chart, derived from graph prototypes, reflects FS reserved space as the difference between used and available space from the total volume.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |a3dc630729e443139f4e608954fa6e19|FREEBSD BY ZABBIX AGENT |Zabbix |7.2-0 |NULL |0 |ROW |10076 |NULL |AIX by Zabbix agent |3 |-1 |2 | | |AIX by Zabbix agent |0 |NULL |This is an official AIX template. It requires Zabbix agent 7.2 or newer.&eol;&eol;Notes on filesystem (FS) discovery:&eol; - The ext4/3/2 FS reserves space for privileged usage, typically set at 5% by default.&eol; - BTRFS allocates a default of 10% of the volume for its own needs.&eol; - To mitigate potential disasters, FS usage triggers are based on the maximum available space.&eol; - Utilization formula: 'pused = 100 - 100 * (available / total - free + available)'&eol; - The FS utilization chart, derived from graph prototypes, reflects FS reserved space as the difference between used and available space from the total volume.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |7e6bb0931a72459db9514aa924b420bc|AIX BY ZABBIX AGENT |Zabbix |7.2-0 |NULL |0 |ROW |10077 |NULL |HP-UX by Zabbix agent |3 |-1 |2 | | |HP-UX by Zabbix agent |0 |NULL |This is an official HP-UX template. It requires Zabbix agent 7.2 or newer.&eol;&eol;Notes on filesystem (FS) discovery:&eol; - The ext4/3/2 FS reserves space for privileged usage, typically set at 5% by default.&eol; - BTRFS allocates a default of 10% of the volume for its own needs.&eol; - To mitigate potential disasters, FS usage triggers are based on the maximum available space.&eol; - Utilization formula: 'pused = 100 - 100 * (available / total - free + available)'&eol; - The FS utilization chart, derived from graph prototypes, reflects FS reserved space as the difference between used and available space from the total volume.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |b1fd823d262042e08291313f72be9452|HP-UX BY ZABBIX AGENT |Zabbix |7.2-0 |NULL |0 |ROW |10078 |NULL |Solaris by Zabbix agent |3 |-1 |2 | | |Solaris by Zabbix agent |0 |NULL |This is an official Solaris OS template. It requires Zabbix agent 7.2 or newer.&eol;&eol;Notes on filesystem (FS) discovery:&eol; - The ext4/3/2 FS reserves space for privileged usage, typically set at 5% by default.&eol; - BTRFS allocates a default of 10% of the volume for its own needs.&eol; - To mitigate potential disasters, FS usage triggers are based on the maximum available space.&eol; - Utilization formula: 'pused = 100 - 100 * (available / total - free + available)'&eol; - The FS utilization chart, derived from graph prototypes, reflects FS reserved space as the difference between used and available space from the total volume.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |eaf36c98b91843b7b79bd5184a23d377|SOLARIS BY ZABBIX AGENT |Zabbix |7.2-0 |NULL |0 |ROW |10079 |NULL |macOS by Zabbix agent |3 |-1 |2 | | |macOS by Zabbix agent |0 |NULL |This is an official macOS template. It requires Zabbix agent 7.2 or newer.&eol;&eol;Notes on filesystem (FS) discovery:&eol; - The ext4/3/2 FS reserves space for privileged usage, typically set at 5% by default.&eol; - BTRFS allocates a default of 10% of the volume for its own needs.&eol; - To mitigate potential disasters, FS usage triggers are based on the maximum available space.&eol; - Utilization formula: 'pused = 100 - 100 * (available / total - free + available)'&eol; - The FS utilization chart, derived from graph prototypes, reflects FS reserved space as the difference between used and available space from the total volume.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |f895df5b37494f668cde1a2388d7af8b|MACOS BY ZABBIX AGENT |Zabbix |7.2-0 |NULL |0 |ROW |10081 |NULL |Windows by Zabbix agent |3 |-1 |2 | | |Windows by Zabbix agent |0 |NULL |This is an official Windows template. It requires Zabbix agent 7.2 or newer.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/387224-discussion-thread-for-official-zabbix-template-for-windows&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |13b06904a6bf41cbb795e3193d896340|WINDOWS BY ZABBIX AGENT |Zabbix |7.2-0 |NULL |0 |ROW |10084 |NULL |Zabbix server |0 |-1 |2 | | |Zabbix server |0 |NULL | |1 |1 | | | | |0 |0 | |ZABBIX SERVER | | |NULL |0 |ROW |10169 |NULL |Generic Java JMX |3 |-1 |2 | | |Generic Java JMX |0 |NULL |Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |72aab08f7f27406a8f2c291648e5ba95|GENERIC JAVA JMX |Zabbix |7.2-0 |NULL |0 |ROW |10171 |NULL |Intel SR1530 IPMI |3 |-1 |2 | | |Intel SR1530 IPMI |0 |NULL |Template for monitoring Intel SR1530 server system.&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |f01bd64eef4049fabe087cccae590226|INTEL SR1530 IPMI |Zabbix |7.2-0 |NULL |0 |ROW |10172 |NULL |Intel SR1630 IPMI |3 |-1 |2 | | |Intel SR1630 IPMI |0 |NULL |Template for monitoring Intel SR1630 server system.&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |2327c665b46e4aa781d41240168c3867|INTEL SR1630 IPMI |Zabbix |7.2-0 |NULL |0 |ROW |10173 |NULL |VMware |3 |-1 |2 | | |VMware |0 |NULL |You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/&eol;&eol;Note: To enable discovery of hardware sensors of VMware Hypervisors, set the macro '{$VMWARE.HV.SENSOR.DISCOVERY}' to the value 'true' on the discovered host level.&eol;&eol;Note: To create custom performance counter see documentation: https://www.zabbix.com/documentation/7.2/manual/vm_monitoring/vmware_keys#footnotes&eol;&eol;Note: To get all supported counters and generate path for custom performance counter see documentation: https://www.zabbix.com/documentation/7.2/manual/appendix/items/perf_counters&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |56079badd056419383cc26e6a4fcc7e0|VMWARE |Zabbix |7.2-0 |NULL |0 |ROW |10174 |NULL |VMware Guest |3 |-1 |2 | | |VMware Guest |0 |NULL |Note: To enable trigger for free space for guest VM, set macro '{$VMWARE.VM.FS.TRIGGER.USED}' to the value '1' on the discovered host level.&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |7942fb93ae3b47cf9ca0ea4beb0675ce|VMWARE GUEST |Zabbix |7.2-0 |NULL |0 |ROW |10175 |NULL |VMware Hypervisor |3 |-1 |2 | | |VMware Hypervisor |0 |NULL |You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/&eol;&eol;This template can be used in discovery as well as manually linked to a host. To use this template as manually linked to a host, attach it to the host and set manually the value of '{$VMWARE.HV.UUID}' macro.&eol;&eol;Note: To create custom performance counter see documentation: https://www.zabbix.com/documentation/7.2/manual/vm_monitoring/vmware_keys#footnotes&eol;&eol;Note: To get all supported counters and generate path for custom performance counter see documentation: https://www.zabbix.com/documentation/7.2/manual/appendix/items/perf_counters&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |5899b2f0aced4085b5ac25d0461b3425|VMWARE HYPERVISOR |Zabbix |7.2-1 |NULL |0 |ROW |10207 |NULL |Alcatel Timetra TiMOS by SNMP |3 |-1 |2 | | |Alcatel Timetra TiMOS by SNMP |0 |NULL |Template Net Alcatel Timetra TiMOS&eol;&eol;MIBs used:&eol;EtherLike-MIB&eol;TIMETRA-SYSTEM-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;TIMETRA-CHASSIS-MIB&eol;IF-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |53044571fb864d87af32473e08c76d0b|ALCATEL TIMETRA TIMOS BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10208 |NULL |Brocade FC by SNMP |3 |-1 |2 | | |Brocade FC by SNMP |0 |NULL |Template Net Brocade FC&eol;&eol;MIBs used:&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;SW-MIB&eol;IF-MIB&eol;&eol;Known Issues:&eol;&eol; Description: no IF-MIB::ifAlias is available&eol; Version: v6.3.1c, v7.0.0c, v7.4.1c&eol; Device: all&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |de96d02bd5f242bfa31308ae2131d03f|BROCADE FC BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10210 |NULL |Brocade_Foundry Nonstackable by SNMP |3 |-1 |2 | | |Brocade_Foundry Nonstackable by SNMP |0 |NULL |Template Net Brocade Foundry Nonstackable&eol;&eol;MIBs used:&eol;FOUNDRY-SN-AGENT-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;IF-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |6ecfb7083ddf45f183ab4be50cfba37a|BROCADE_FOUNDRY NONSTACKABLE BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10211 |NULL |Brocade_Foundry Stackable by SNMP |3 |-1 |2 | | |Brocade_Foundry Stackable by SNMP |0 |NULL |Template Brocade Foundry Stackable&eol;&eol;MIBs used:&eol;FOUNDRY-SN-AGENT-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;FOUNDRY-SN-STACKING-MIB&eol;IF-MIB&eol;&eol;Known Issues:&eol;&eol; Description: Correct fan(returns fan status as 'other(1)' and temperature (returns 0) for the non-master Switches are not available in SNMP&eol; Version: Version 08.0.40b and above&eol; Device: ICX 7750 in stack&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |f64ad01567914165a493815e492fb315|BROCADE_FOUNDRY STACKABLE BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10218 |NULL |Cisco IOS by SNMP |3 |-1 |2 | | |Cisco IOS by SNMP |0 |NULL |Template Cisco IOS Software releases 12.2(3.5) or later&eol;&eol;MIBs used:&eol;CISCO-MEMORY-POOL-MIB&eol;IF-MIB&eol;EtherLike-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;CISCO-ENVMON-MIB&eol;CISCO-PROCESS-MIB&eol;ENTITY-MIB&eol;&eol;Known Issues:&eol;&eol; Description: no if(in&pipe;out)(Errors&pipe;Discards) are available for vlan ifType&eol; Version: IOS for example: 12.1(22)EA11, 15.4(3)M2&eol; Device: C2911, C7600&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |aa3ce9bd8c1d40a2b0f83f9e642e88ee|CISCO IOS BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10220 |NULL |Cisco IOS prior to 12.0_3_T by SNMP |3 |-1 |2 | | |Cisco IOS prior to 12.0_3_T by SNMP |0 |NULL |Cisco IOS Software releases prior to 12.0(3)T&eol;&eol;MIBs used:&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;OLD-CISCO-CPU-MIB&eol;CISCO-ENVMON-MIB&eol;CISCO-MEMORY-POOL-MIB&eol;ENTITY-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |1bb42fbdb9054645a62ff81f14ba3b99|CISCO IOS PRIOR TO 12.0_3_T BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10221 |NULL |Dell Force S-Series by SNMP |3 |-1 |2 | | |Dell Force S-Series by SNMP |0 |NULL |Template Dell Force S-Series&eol;&eol;MIBs used:&eol;F10-S-SERIES-CHASSIS-MIB&eol;EtherLike-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;IF-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |e5ec7acc7efc4ac491b6fa552ab077ae|DELL FORCE S-SERIES BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10222 |NULL |D-Link DES 7200 by SNMP |3 |-1 |2 | | |D-Link DES 7200 by SNMP |0 |NULL |Template D-Link DES 7200&eol;&eol;MIBs used:&eol;ENTITY-MIBdescription has changed&eol;IF-MIB&eol;MY-PROCESS-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;MY-MEMORY-MIB&eol;ENTITY-MIB&eol;MY-SYSTEM-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |395184b5d5b048a68e06c91154c56847|D-LINK DES 7200 BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10223 |NULL |D-Link DES_DGS Switch by SNMP |3 |-1 |2 | | |D-Link DES_DGS Switch by SNMP |0 |NULL |Template D-Link DES_DGS Switch&eol;&eol;MIBs used:&eol;EQUIPMENT-MIB&eol;IF-MIB&eol;DLINK-AGENT-MIB&eol;EtherLike-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;ENTITY-MIB&eol;&eol;Known Issues:&eol;&eol; Description: D-Link reports missing PSU as fail(4)&eol; Version: Firmware: 1.73R008,hardware revision: B1&eol; Device: DGS-3420-26SC Gigabit Ethernet Switch&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |d3176749a5274264938f487cd89d17eb|D-LINK DES_DGS SWITCH BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10224 |NULL |Extreme EXOS by SNMP |3 |-1 |2 | | |Extreme EXOS by SNMP |0 |NULL |Template Extreme EXOS&eol;&eol;MIBs used:&eol;EXTREME-SYSTEM-MIB&eol;IF-MIB&eol;EtherLike-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;EXTREME-SOFTWARE-MONITOR-MIB&eol;ENTITY-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |861dbdece18f4b8f85214a319995eb3e|EXTREME EXOS BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10226 |NULL |Network Generic Device by SNMP |3 |-1 |2 | | |Network Generic Device by SNMP |0 |NULL |Template Net Network Generic Device&eol;&eol;MIBs used:&eol;EtherLike-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;IF-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |67332e679035423f85090aa985947c36|NETWORK GENERIC DEVICE BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10227 |NULL |HP Comware HH3C by SNMP |3 |-1 |2 | | |HP Comware HH3C by SNMP |0 |NULL |Template Net HP Comware (HH3C)&eol;&eol;MIBs used:&eol;EtherLike-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;ENTITY-MIB&eol;HH3C-ENTITY-EXT-MIB&eol;IF-MIB&eol;&eol;Known Issues:&eol;&eol; Description: No temperature sensors. All entities of them return 0 for HH3C-ENTITY-EXT-MIB::hh3cEntityExtTemperature&eol; Version: 1910-48 Switch Software Version 5.20.99, Release 1116 Copyright(c)2010-2016 Hewlett Packard Enterprise Development LP&eol; Device: HP 1910-48&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |57aeccd43b744942b9555269b79a96ad|HP COMWARE HH3C BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10229 |NULL |Huawei VRP by SNMP |3 |-1 |2 | | |Huawei VRP by SNMP |0 |NULL |Template Net Huawei VRP&eol;&eol;MIBs used:&eol;EtherLike-MIB&eol;HUAWEI-ENTITY-EXTENT-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;ENTITY-MIB&eol;IF-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |ad4c3dad4b7b492685d1fd3bd3a664f9|HUAWEI VRP BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10230 |NULL |Intel_Qlogic Infiniband by SNMP |3 |-1 |2 | | |Intel_Qlogic Infiniband by SNMP |0 |NULL |Template Net Intel_Qlogic Infiniband&eol;&eol;MIBs used:&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;ICS-CHASSIS-MIB&eol;IF-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |6f7f2c44e13a46a4b219fbb5db92f3f7|INTEL_QLOGIC INFINIBAND BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10231 |NULL |Juniper by SNMP |3 |-1 |2 | | |Juniper by SNMP |0 |NULL |Template Net Juniper&eol;&eol;MIBs used:&eol;EtherLike-MIB&eol;JUNIPER-ALARM-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;JUNIPER-MIB&eol;IF-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |a326034825984bbd8a3a5885f3939bb3|JUNIPER BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10233 |NULL |Mikrotik by SNMP |3 |-1 |2 | | |Mikrotik by SNMP |0 |NULL |Template Net Mikrotik&eol;&eol;MIBs used:&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;MIKROTIK-MIB&eol;IF-MIB&eol;&eol;Known Issues:&eol;&eol; Description: Doesn't have ifHighSpeed filled. fixed in more recent versions&eol; Version: RouterOS 6.28 or lower&eol;&eol; Description: Doesn't have any temperature sensors&eol; Version: RouterOS 6.38.5&eol; Device: Mikrotik 941-2nD, Mikrotik 951G-2HnD&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |815b5a81b29a477695fddbd533ad9c84|MIKROTIK BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10234 |NULL |Netgear Fastpath by SNMP |3 |-1 |2 | | |Netgear Fastpath by SNMP |0 |NULL |Template Net Netgear Fastpath&eol;&eol;MIBs used:&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;FASTPATH-SWITCHING-MIB&eol;FASTPATH-BOXSERVICES-PRIVATE-MIB&eol;IF-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |5920713da492452889adabc25e259caa|NETGEAR FASTPATH BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10235 |NULL |QTech QSW by SNMP |3 |-1 |2 | | |QTech QSW by SNMP |0 |NULL |Template Net QTech QSW&eol;&eol;MIBs used:&eol;QTECH-MIB&eol;EtherLike-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;ENTITY-MIB&eol;IF-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |21f3e79e1d2e4f5e868d1ef81c94bbfd|QTECH QSW BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10236 |NULL |TP-LINK by SNMP |3 |-1 |2 | | |TP-LINK by SNMP |0 |NULL |Template Net TP-LINK&eol;&eol;MIBs used:&eol;TPLINK-SYSINFO-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;TPLINK-SYSMONITOR-MIB&eol;IF-MIB&eol;&eol;Known Issues:&eol;&eol; Description: Default sysLocation, sysName and sysContact is not filled with proper data. Real hostname and location can be found only in private branch (TPLINK-SYSINFO-MIB). Please check whether this problem exists in the latest firmware: https://www.tp-link.com/en/support/download/t2600g-28ts/#Firmware&eol; Version: 2.0.0 Build 20170628 Rel.55184 (Beta)&eol; Device: T2600G-28TS 2.0&eol;&eol; Description: The Serial number of the product (tpSysInfoSerialNum) is missing in HW versions prior to V2_170323&eol; Version: Prior to version V2_170323&eol; Device: T2600G-28TS 2.0&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |2b9039885edf45b8bdd39f16dd069133|TP-LINK BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10237 |NULL |Ubiquiti AirOS by SNMP |3 |-1 |2 | | |Ubiquiti AirOS by SNMP |0 |NULL |Template Net Ubiquiti AirOS&eol;&eol;MIBs used:&eol;FROGFOOT-RESOURCES-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;IEEE802dot11-MIB&eol;IF-MIB&eol;&eol;Known Issues:&eol;&eol; Description: UBNT unifi reports speed: like IF-MIB::ifSpeed.1 = Gauge32: 4294967295 for all interfaces&eol; Version: Firmware: BZ.ar7240.v3.7.51.6230.170322.1513&eol; Device: UBNT UAP-LR&eol;&eol; Description: UBNT AirMax(NanoStation, NanoBridge etc) reports ifSpeed: as 0 for VLAN and wireless(ath0) interfaces&eol; Version: Firmware: XW.ar934x.v5.6-beta4.22359.140521.1836&eol; Device: NanoStation M5&eol;&eol; Description: UBNT AirMax(NanoStation, NanoBridge etc) reports always return ifType: as ethernet(6) even for wifi,vlans and other types&eol; Version: Firmware: XW.ar934x.v5.6-beta4.22359.140521.1836&eol; Device: NanoStation M5&eol;&eol; Description: ifXTable is not provided in IF-MIB. So Interfaces Simple Template is used instead&eol; Version: all above&eol; Device: NanoStation, UAP-LR&eol;&eol;Generated by official Zabbix template tool "Templator"|1 |1 | | | | |0 |0 |6c235d126c1f4895acfe2156b140a886|UBIQUITI AIROS BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10248 |NULL |Linux by SNMP |3 |-1 |2 | | |Linux by SNMP |0 |NULL |This is an official Linux template. It requires an SNMP client.&eol;&eol;MIBs used:&eol;EtherLike-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;UCD-DISKIO-MIB&eol;UCD-SNMP-MIB&eol;IF-MIB&eol;&eol;Notes on filesystem (FS) discovery:&eol; - The ext4/3/2 FS reserves space for privileged usage, typically set at 5% by default.&eol; - BTRFS allocates a default of 10% of the volume for its own needs.&eol; - To mitigate potential disasters, FS usage triggers are based on the maximum available space.&eol; - Utilization formula: 'pused = 100 * (used / used + available)'&eol; - The FS utilization chart, derived from graph prototypes, reflects FS reserved space as the difference between used and available space from the total volume.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/387225-discussion-thread-for-official-zabbix-template-for-linux&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |4d3a7adbb6964bd08f2b9d28e0da6496|LINUX BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10249 |NULL |Windows by SNMP |3 |-1 |2 | | |Windows by SNMP |0 |NULL |This is an official Windows template. It requires an SNMP client.&eol;&eol;MIBs used:&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;IF-MIB&eol;&eol;Known Issues:&eol;&eol; Description:&eol; 64-bit I/O is not supported even though `IfxTable` is present.&eol; Currently, Windows gets its interface status from MIB-2. Since these 64-bit SNMP counters (`ifHCInOctets`, `ifHCOutOctets`, etc.) are defined as an extension to IF-MIB, Microsoft has not implemented it.&eol; https://social.technet.microsoft.com/Forums/windowsserver/en-US/07b62ff0-94f6-40ca-a99d-d129c1b33d70/windows-2008-r2-snmp-64bit-counters-support?forum=winservergen&eol; Version: Win2008, Win2012R2.&eol;&eol; Description: MIB is not supported&eol; Version: WindowsXP&eol;&eol; Description: EtherLike MIB is not supported&eol; Version: any&eol;&eol; Description:&eol; HOST-RESOURCES-MIB::hrStorageSize is limited to number 2147483647.&eol; Storage size is calculated using: `hrStorageSize` and `hrStorageAllocationUnits`.&eol; Allocation size of 512 bytes, sets the limit of monitored device to 1TB.&eol; Version: any&eol;&eol;Generated by official Zabbix template tool "Templator"|1 |1 | | | | |0 |0 |f9a59315c8944853bb91c0a9ec3056d7|WINDOWS BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10250 |NULL |HP Enterprise Switch by SNMP |3 |-1 |2 | | |HP Enterprise Switch by SNMP |0 |NULL |Template Net HP Enterprise Switch&eol;&eol;MIBs used:&eol;NETSWITCH-MIB&eol;HP-ICF-CHASSIS&eol;ENTITY-SENSORS-MIB&eol;IF-MIB&eol;EtherLike-MIB&eol;SEMI-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;ENTITY-MIB&eol;STATISTICS-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |cce20a5d149a48b7ac7f5383c3510883|HP ENTERPRISE SWITCH BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10251 |NULL |Mellanox by SNMP |3 |-1 |2 | | |Mellanox by SNMP |0 |NULL |The updated template for monitoring the Mellanox network switches over SNMP agent. All items collected in one template without any linked templates.&eol;&eol;MIBs used:&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;ENTITY-SENSORS-MIB&eol;ENTITY-STATE-MIB&eol;ENTITY-MIB&eol;IF-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |a60798c651604d93a062bec0f8a89751|MELLANOX BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10253 |NULL |Cisco IOS versions 12.0_3_T-12.2_3.5 by SNMP |3 |-1 |2 | | |Cisco IOS versions 12.0_3_T-12.2_3.5 by SNMP |0 |NULL |Cisco IOS Software releases later to 12.0(3)T and prior to 12.2(3.5)&eol;&eol;MIBs used:&eol;CISCO-MEMORY-POOL-MIB&eol;IF-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;CISCO-ENVMON-MIB&eol;CISCO-PROCESS-MIB&eol;ENTITY-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |40c233aaa3424fd29dc378022ff3461d|CISCO IOS VERSIONS 12.0_3_T-12.2_3.5 BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10254 |NULL |Arista by SNMP |3 |-1 |2 | | |Arista by SNMP |0 |NULL |Template Net Arista&eol;&eol;MIBs used:&eol;ENTITY-SENSORS-MIB&eol;ENTITY-STATE-MIB&eol;IF-MIB&eol;EtherLike-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;ENTITY-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |26674f62500e4e79b9f470bbf962130d|ARISTA BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10255 |NULL |Dell iDRAC by SNMP |3 |-1 |2 | | |Dell iDRAC by SNMP |0 |NULL |Template Server iDRAC&eol;&eol;MIBs used:&eol;HOST-RESOURCES-MIB&eol;IDRAC-MIB-SMIv2&eol;SNMPv2-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |43dc5c8a9a0e4786b64e44422c7f32b4|DELL IDRAC BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10256 |NULL |HP iLO by SNMP |3 |-1 |2 | | |HP iLO by SNMP |0 |NULL |Template Server HP iLO&eol;MIBs used:&eol;HOST-RESOURCES-MIB&eol;CPQHLTH-MIB&eol;SNMPv2-MIB&eol;CPQSINFO-MIB&eol;CPQIDA-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |c2a7ddca051d4b4a9553f339c57e47a9|HP ILO BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10258 |NULL |IBM IMM by SNMP |3 |-1 |2 | | |IBM IMM by SNMP |0 |NULL |Template Server IBM IMM&eol;&eol;MIBs used:&eol;IMM-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;&eol;Known Issues:&eol;&eol; Description: Some IMMs (IMM1) do not return disks&eol; Version: IMM1&eol; Device: IBM x3250M3&eol;&eol; Description: Some IMMs (IMM1) do not return fan status: fanHealthStatus&eol; Version: IMM1&eol; Device: IBM x3250M3&eol;&eol; Description: IMM1 servers (M2, M3 generations) sysObjectID is NET-SNMP-MIB::netSnmpAgentOIDs.10&eol; Version: IMM1&eol; Device: IMM1 servers (M2,M3 generations)&eol;&eol; Description: IMM1 servers (M2, M3 generations) only Ambient temperature sensor available&eol; Version: IMM1&eol; Device: IMM1 servers (M2,M3 generations)&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |c9e1acd3ae4a427ab39724b6bcaf839e|IBM IMM BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10259 |NULL |Supermicro Aten by SNMP |3 |-1 |2 | | |Supermicro Aten by SNMP |0 |NULL |Template Server Supermicro Aten&eol;&eol;MIBs used:&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;ATEN-IPMI-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |cf0947cc05d3450b9a6d66b2eb180482|SUPERMICRO ATEN BY SNMP |Zabbix |7.2-0 |NULL |0 |ROW |10260 |NULL |Apache Tomcat by JMX |3 |-1 |2 | | |Apache Tomcat by JMX |0 |NULL |The template to monitor Apache Tomcat by Zabbix that work without any external scripts.&eol;The metrics are collected by JMX.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/411862-discussion-thread-for-official-zabbix-template-tomcat&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |3cc8c9ae7055458c9a803597007f70bd|APACHE TOMCAT BY JMX |Zabbix |7.2-0 |NULL |0 |ROW |10261 |NULL |Remote Zabbix server health |3 |-1 |2 | | |Remote Zabbix server health |0 |NULL |This template is designed to monitor internal Zabbix metrics on the remote Zabbix server.&eol;&eol;Specify the address of the remote Zabbix server by changing {$ZABBIX.SERVER.ADDRESS} and {$ZABBIX.SERVER.PORT} macros. Don't forget to adjust the "StatsAllowedIP" parameter in the remote server's configuration file to allow the collection of statistics.&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |79b16cbbe593444eae3de66de0cb566b|REMOTE ZABBIX SERVER HEALTH |Zabbix |7.2-0 |NULL |0 |ROW |10262 |NULL |Remote Zabbix proxy health |3 |-1 |2 | | |Remote Zabbix proxy health |0 |NULL |Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |970c2342146549768e6b91a26089bcdf|REMOTE ZABBIX PROXY HEALTH |Zabbix |7.2-0 |NULL |0 |ROW |10264 |NULL |Apache by Zabbix agent |3 |-1 |2 | | |Apache by Zabbix agent |0 |NULL |Get metrics from mod_status module using HTTP agent.&eol;https://httpd.apache.org/docs/current/mod/mod_status.html&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/384764-discussion-thread-for-official-zabbix-template-apache&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |a8d91e4f36794e32b73090d5edf3d7ae|APACHE BY ZABBIX AGENT |Zabbix |7.2-0 |NULL |0 |ROW |10265 |NULL |Apache by HTTP |3 |-1 |2 | | |Apache by HTTP |0 |NULL |This template is designed for the effortless deployment of Apache monitoring by Zabbix via HTTP and doesn't require any external scripts.&eol;&eol;The template collects metrics by polling 'mod_status' with HTTP agent remotely.&eol;&eol;Setup:&eol;&eol;1. See the setup instructions for mod_status:&eol;https://httpd.apache.org/docs/current/mod/mod_status.html&eol;&eol;Check the availability of the module with this command line:&eol;httpd -M 2>/dev/null &pipe; grep status_module&eol;&eol;This is an example configuration of the Apache web server:&eol;&eol;<Location "/server-status">&eol; SetHandler server-status&eol; Require host example.com&eol;</Location>&eol;&eol;2. Set the hostname or IP address of the Apache status page host in the '{$APACHE.STATUS.HOST}' macro. You can also change the status page port in the '{$APACHE.STATUS.PORT}' macro and status page path in the '{$APACHE.STATUS.PATH}' macro if necessary.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/384764-discussion-thread-for-official-zabbix-template-apache&eol;&eol;Generated by official Zabbix template tool "Templator"|1 |1 | | | | |0 |0 |86702e8bc514434e8c914d50c206cb94|APACHE BY HTTP |Zabbix |7.2-0 |NULL |0 |ROW |10266 |NULL |Nginx by Zabbix agent |3 |-1 |2 | | |Nginx by Zabbix agent |0 |NULL |Get metrics from stub status module using Zabbix agent running on Linux&eol;https://nginx.ru/en/docs/http/ngx_http_stub_status_module.html&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/384765-discussion-thread-for-official-zabbix-template-nginx&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |27f6424905884dbb96ab9210d987a56c|NGINX BY ZABBIX AGENT |Zabbix |7.2-0 |NULL |0 |ROW |10267 |NULL |Nginx by HTTP |3 |-1 |2 | | |Nginx by HTTP |0 |NULL |This template is developed to monitor Nginx by Zabbix that works without any external scripts.&eol;Most of the metrics are collected in one go, thanks to Zabbix bulk data collection.&eol;&eol;The template collects metrics by polling the module 'ngx_http_stub_status_module' with HTTP agent remotely:&eol;https://nginx.ru/en/docs/http/ngx_http_stub_status_module.html&eol;&eol;Active connections: 291&eol;server accepts handled requests&eol;16630948 16630948 31070465&eol;Reading: 6 Writing: 179 Waiting: 106&eol;&eol;Setup:&eol;&eol;1. See the setup instructions for 'ngx_http_stub_status_module':&eol;https://nginx.ru/en/docs/http/ngx_http_stub_status_module.html&eol;&eol;Test the availability of the 'http_stub_status_module' with 'nginx -V 2>&1 &pipe; grep -o with-http_stub_status_module'.&eol;&eol;Example configuration of Nginx:&eol;&eol;location = /basic_status {&eol; stub_status;&eol; allow <IP of your Zabbix server/proxy>;&eol; deny all;&eol;}&eol;&eol;2. Set the hostname or IP address of the Nginx host or Nginx container in the '{$NGINX.STUB_STATUS.HOST}' macro. You can also change the status page port in the '{$NGINX.STUB_STATUS.PORT}' macro, the status page scheme in the '{$NGINX.STUB_STATUS.SCHEME}' macro and the status page path in the '{$NGINX.STUB_STATUS.PATH}' macro if necessary.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/384765-discussion-thread-for-official-zabbix-template-nginx&eol;&eol;Generated by official Zabbix template tool "Templator"|1 |1 | | | | |0 |0 |13d5bb0a4ae84228bff408aab5be338e|NGINX BY HTTP |Zabbix |7.2-0 |NULL |0 |ROW |10285 |NULL |Linux by Prom |3 |-1 |2 | | |Linux by Prom |0 |NULL |This template collects Linux metrics from node_exporter 0.18 and above. Support for older node_exporter versions is provided as 'best effort'.&eol;&eol;Setup:&eol;&eol;1. Set up the node_exporter according to the official documentation:&eol;https://prometheus.io/docs/guides/node-exporter/&eol;&eol;Use node_exporter v0.18.0 or above.&eol;&eol;2. Set the hostname or IP address of the node_exporter host in the '{$NODE_EXPORTER_HOST}' macro. You can also change the Prometheus endpoint port in the '{$NODE_EXPORTER_PORT}' macro if necessary.&eol;&eol;Known Issues:&eol;&eol; - Node Exporter 0.16.0 renamed many metrics. CPU utilization for "guest" and "guest_nice" metrics are not supported in this template with Node Exporter < 0.16. Disk IO metrics are not supported. Other metrics provided as best effort. See https://github.com/prometheus/node_exporter/releases/tag/v0.16.0 for details.&eol; - version: below 0.16.0&eol; - metric node_network_info with label 'device' cannot be found, so network discovery is not possible.&eol; - version: below 0.18&eol;&eol;Notes on filesystem (FS) discovery:&eol; - The ext4/3/2 FS reserves space for privileged usage, typically set at 5% by default.&eol; - BTRFS allocates a default of 10% of the volume for its own needs.&eol; - To mitigate potential disasters, FS usage triggers are based on the maximum available space.&eol; - Utilization formula: 'pused = 100 - 100 * (available / total - free + available)'&eol; - The FS utilization chart, derived from graph prototypes, reflects FS reserved space as the difference between used and available space from the total volume.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/387225-discussion-thread-for-official-zabbix-template-for-linux&eol;&eol;Generated by official Zabbix template tool "Templator"|1 |1 | | | | |0 |0 |2506b0ca01884903b547b1e19b76ce6d|LINUX BY PROM |Zabbix |7.2-0 |NULL |0 |ROW |10300 |NULL |RabbitMQ cluster by Zabbix agent |3 |-1 |2 | | |RabbitMQ cluster by Zabbix agent |0 |NULL |Get cluster metrics from RabbitMQ management plugin provided an HTTP-based API using Zabbix agent.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/387226-discussion-thread-for-official-zabbix-template-rabbitmq&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |5fa761bc51e4432a90c6c9eece930c4a|RABBITMQ CLUSTER BY ZABBIX AGENT |Zabbix |7.2-0 |NULL |0 |ROW |10301 |NULL |RabbitMQ node by Zabbix agent |3 |-1 |2 | | |RabbitMQ node by Zabbix agent |0 |NULL |Get node metrics from RabbitMQ management plugin provided an HTTP-based API using Zabbix agent.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/387226-discussion-thread-for-official-zabbix-template-rabbitmq&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |d5dc11ae9ab143a89c4be534bbb35188|RABBITMQ NODE BY ZABBIX AGENT |Zabbix |7.2-0 |NULL |0 |ROW |10302 |NULL |RabbitMQ cluster by HTTP |3 |-1 |2 | | |RabbitMQ cluster by HTTP |0 |NULL |This template is developed to monitor the messaging broker RabbitMQ cluster by Zabbix that works without any external scripts.&eol;Most of the metrics are collected in one go, thanks to Zabbix bulk data collection.&eol;&eol;The template collects metrics by polling RabbitMQ management plugin with HTTP agent remotely.&eol;&eol;Setup:&eol;&eol;1. Enable the RabbitMQ management plugin. See the RabbitMQ documentation for the instructions:&eol;https://www.rabbitmq.com/management.html&eol;&eol;2. Create a user to monitor the service:&eol;&eol;rabbitmqctl add_user zbx_monitor <PASSWORD>&eol;rabbitmqctl set_permissions -p / zbx_monitor "" "" ".*"&eol;rabbitmqctl set_user_tags zbx_monitor monitoring&eol;&eol;3. Set the hostname or IP address of the RabbitMQ cluster host in the '{$RABBITMQ.API.CLUSTER_HOST}' macro. You can also change the port in the '{$RABBITMQ.API.PORT}' macro and the scheme in the '{$RABBITMQ.API.SCHEME}' macro if necessary.&eol;&eol;4. Set the user name and password in the macros '{$RABBITMQ.API.USER}' and '{$RABBITMQ.API.PASSWORD}'.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/387226-discussion-thread-for-official-zabbix-template-rabbitmq&eol;&eol;Generated by official Zabbix template tool "Templator"|1 |1 | | | | |0 |0 |8c8474148c2a4eaeabe5a9331ea99d77|RABBITMQ CLUSTER BY HTTP |Zabbix |7.2-0 |NULL |0 |ROW |10303 |NULL |RabbitMQ node by HTTP |3 |-1 |2 | | |RabbitMQ node by HTTP |0 |NULL |This template is developed to monitor the messaging broker RabbitMQ node by Zabbix that works without any external scripts.&eol;Most of the metrics are collected in one go, thanks to Zabbix bulk data collection.&eol;&eol;The template collects metrics by polling RabbitMQ management plugin with HTTP agent remotely.&eol;&eol;Setup:&eol;&eol;1. Enable the RabbitMQ management plugin. See the RabbitMQ documentation for the instructions:&eol;https://www.rabbitmq.com/management.html&eol;&eol;2. Create a user to monitor the service:&eol;&eol;rabbitmqctl add_user zbx_monitor <PASSWORD>&eol;rabbitmqctl set_permissions -p / zbx_monitor "" "" ".*"&eol;rabbitmqctl set_user_tags zbx_monitor monitoring&eol;&eol;3. Set the hostname or IP address of the RabbitMQ node host in the '{$RABBITMQ.API.HOST}' macro. You can also change the port in the '{$RABBITMQ.API.PORT}' macro and the scheme in the '{$RABBITMQ.API.SCHEME}' macro if necessary.&eol;&eol;4. Set the user name and password in the macros '{$RABBITMQ.API.USER}' and '{$RABBITMQ.API.PASSWORD}'.&eol;&eol;You can discuss this template or leave feedback on our forum https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/387226-discussion-thread-for-official-zabbix-template-rabbitmq&eol;&eol;Generated by official Zabbix template tool "Templator"|1 |1 | | | | |0 |0 |b9514029d03b44de9adf24251778dbf3|RABBITMQ NODE BY HTTP |Zabbix |7.2-0 |NULL |0 |ROW |10304 |NULL |Cisco UCS by SNMP |3 |-1 |2 | | |Cisco UCS by SNMP |0 |NULL |Template Server Cisco UCS&eol;&eol;MIBs used:&eol;CISCO-UNIFIED-COMPUTING-COMPUTE-MIB&eol;HOST-RESOURCES-MIB&eol;SNMPv2-MIB&eol;CISCO-UNIFIED-COMPUTING-PROCESSOR-MIB&eol;CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB&eol;CISCO-UNIFIED-COMPUTING-STORAGE-MIB&eol;&eol;Generated by official Zabbix template tool "Templator" |1 |1 | | | | |0 |0 |cb66d34564e44b3893442fc74cf6e951|CISCO UCS BY SNMP |Zabbix |7.2-0 |NULL |0 |